Specifications

126 Chapter 9 Pinout reference
RJ-45 (Altpin On) to RJ-45 Cisco console adapter
The wiring diagram for an Altpin RJ-45 8-pin to a Cisco Console RJ-45 8-pin adapter cable is shown in Table 1.
The Following cables are available from Digi:
76000631 Qty-1 6' Cisco/SUN Netra
76000632 Qty-8 6' Cisco/SUN Netra
76000633 Qty-16 6' Cisco/SUN Netra
Table 1: EIA-232 Altpin RJ-45 to RJ-45
From
RJ-45
Signal Direction Signal
To RJ-45
Cisco
1 DCD DTR 2
5 RxD
TxD 3
4 TxD
RxD 6
8 DTR
DSR 7
6SG
SG 5
2 RTS
CTS 8
7 CTS
RTS 1
3 GND
GND 4
● Arrows indicate which direction the signal is flowing
NOTES:
● Works for most current Cisco routers.
● Be careful not to swap cable ends. One end will go to DIGI and the other to the router.
● Altpin should be turned on when using this cable.