User`s guide

Chapter 8 Special Features: Modem Emulation 79
S23
General Bit Mapped Options Status
Indicates the status of command options.
Default:62 (3Dh) (00111110b)
Bit 0Grant RDL
0 =RDL not allowed (&T5) (Default.)
1 =RDL allowed (&T4)
Bits 1-3DTE Rate
0 =0 - 300 bps
1 =600 bps
2 =1200 bps
3 =2400 bps
4 =4800 bps
5 =9600 bps
6 =19200 bps
7 =38400 bps or higher (Default.)
Bits 4-5Assumed DTE parity
0 =even
1 =not used
2 =odd
3 =none (Default.)
Bits 6-7not action applied
*
62
(3Dh)
S24 Accepted but ignored. 0-255 s * 0
S25
Delay to DTR Off
Sets the length of time that the modem will
ignore DTR for taking the action specified by
&Dn. Its units are seconds for synchronous
modes and one hundredths of a second for
other modes
0-255
s or
0.01 s
5
S26
RTS-to-CTS Delay
Sets the time delay, in hundredths of a second,
before the modem turns CTS ON after
detecting an OFF-to-ON transition on RTS
when &R0 is commanded. Pertains to
synchronous operation only.
0-255 0.01 s 1
S27 General Bit Mapped Options Status - - * 73 (49h)
S28 Accepted but ignored. - - * 0
S29 Accepted but ignored. 0-255 10 ms 70
S30 Accepted but ignored. 0-255 10 s 0
S31 Accepted but ignored. - - *
194
(C2h)
S32 XON Character 0-255 ASCII 17 (11h)
S33 XOFF Character 0-255 ASCII 19 (13h)
S34 S35 Reserved - - -
S36 Accepted but ignored. - - * 7
Register Function Range Units Saved Default