User`s guide

Chapter 5 Special Features: Wireless 59
10..Enter parameters, click Apply to save.
11. Click Reboot for changes to take effect.
Note: WARNING!!!!! changing the Advanced Network Settings could cause you to
‘lose’ your device on the Network
.Digi International recommends that you do NOT
alter the Advanced Network Settings.
If you alter these settings - you may need to
reset your device with the reset button and reconfigure your device as if it
were new. See "Resetting Configuration to Defaults" on page 90 for
instructions.
Be advised these settings are correct for most environments.
12.Unplug the Ethernet cable from the Digi device, disconnect the power,
and power the unit up (reboot).
Configuration is complete.