User`s guide

38 Chapter 3 Configuration
4. Select the type or types of traps you wish to enable.
5. Click Apply.
MEI
This setting only applies to EIA-422/485 Half-Duplex (2 wire) ports. For
more information see "Special Features: Software Selectable MEI" on page
61.
1. Select System > MEI.
2. Select Baud rate from the drop down box.
3. Select apply to all ports if appropriate.
4. Click Apply for configuration to take effect.
About Autoconnection
The autoconnection feature allows you to configure a user to access the
device server and then be automatically connected to a host on the LAN.
You can implement autoconnection in the following ways: