User`s guide

Chapter 3 Configuration 37
3. Click Reboot for changes to take effect.
For dynamic routing or proxy ARP settings follow the procedure for
Advanced PPP settings.
4. Click Advanced PPP settings.
Note: Use the Help button for more information about configuring Advanced PPP
settings.
5. Select Enable Dynamic Routing (RIPv1)
6. Select the passive or active route setting.
7. Select the Process ARP requests if appropriate.
8. Click Apply.
9. Click Reboot for changes to take effect.
SNMP
1. Click System > SNMP
2. Select Enable SNMP.
3. Enter the community (public or private)