User`s guide

36 Chapter 3 Configuration
2. If you are using PPP select Enable Dynamic IP Address Pool for
Incoming Connections.
3. Enter the first reserved IP address of the incoming connections and the
number of addresses to use and click Apply.
4. Click Incoming Connections > New Connection
5. Enter the appropriate parameters and click Apply.
6. Click Reboot for changes to take effect.
For outgoing connections, CHAP or PAP authentication, or password
configuration, use the following procedure.
1. Click Outgoing Connections
Note: CHAP authentication can be used to restrict PPP user access to outbound
ports.
2. Enter the appropriate parameters and click Apply.