User`s guide

34 Chapter 3 Configuration
4. Select the Ports to manage or the Autoconnect function if needed and
click Next.
5. Review settings and click Finish.
Note: The Advanced tab under User allows you to set Escape characters for
Connect, Telnet, Rlogin, and Kill as well as an SSH Public Key.
6. Click Apply to save the settings.
7. Click Reboot for changes to take effect.
Note: User attributes can be changed after the user is set up. Click User > the
User’s name. From here you can change the password, the access method,
the menu, or verify the user’s properties.
User Access Method
1. Set up the user as described in the previous procedure.
2. Click Users > the user name to assign access and select the access
method or methods.
3. Select the ports for the user and click Apply.
Note: From this screen, you may also change or update the users password.
However, if the Admin password is lost, the only recovery is factory default
reset. See "Resetting Configuration to Defaults" on page 90.
Security Configuration
Security settings allow the administrator to set passwords, security levels,
and authentication via RADIUS server. Some services, such as Telnet and
Rlogin, can be disabled for inbound users. This means that the users
cannot access the Digi device using those services. This feature allows
you to turn off individual services or to specify a security level, which
means that all services not included in that level are turned off. The
following services can be turned off.
•SSH
•Reverse SSH
• HTTPS
• HTTP
•SNMP
• RealPort
• Secure RealPort
• Secure Sockets
• Telnet
• Remote Login (RLogin)
• Remote Shell (RSH)
•Reverse TCP
• Reverse Telnet
• Line Printer Daemon (LPD)