User`s guide

Chapter 3 Configuration 25
Note: The serial parameters for two connecting devices must match meaning if one
device is set for 9600 bps, the other device must be set for the same rate.
Serial Bridging
The Digi One IA/SP and the Digi TS Family devices support serial bridging
(sometimes referred to as ‘tunneling’). A serial bridge is a network
connection between two serial devices, each of which uses a device
server. The serial devices “think” they are communicating with each other
across a serial cable using serial communication techniques. There is no
need to reconfigure the server or the serial device. Neither is aware of the
intervening network.
This profile configures each side of the bridge separately. Repeat the
configuration for the second Digi device using the web interface. Enter the
IP address in the URL bar of your browser and follow the same procedure
of the bridge specifying the IP address of the first Digi device.