User`s guide

12 Chapter 1 Introduction
Downloading a Configuration File
With this method, you configure a Digi device and then do the following:
1. Download an existing configuration file to a host system.
2. Edit the file with specific configuration using a text editor.
3. Upload the file to the device server.
This an excellent method for maintaining highly similar configuration files
for multiple Digi devices. The disadvantage is that the device server
requires some configuration steps, such as the IP address, to be
completed before it can be used.
Accessing the Configuration from the Web Interface
To access the configuration from the web interface, follow these steps.
This procedure assumes that you have configured the Digi device with an
IP address already. See "Configuring the IP Address" on page 15.
1. Access the Digi device from a web browser by specifying the device
server’s IP address in the URL window.
2. Log on as root. The default password is dbps.
Quick Find Feature Support Table
The following table is a quick reference for specific features and where to
find the web interface configuration procedures. The User’s Guide supports
the following products:
• Digi One IA
• Digi One SP
• Digi TS Family -The Digi TS Family includes the following devices:
— Digi One IAP
— PortServer TS 1 MEI
— PortServer TS 2 MEI
— PortServer TS 4 MEI
— PortServer TS 1 H MEI
— PortServer TS 2 H MEI
— PortServer TS 4 H MEI
— PortServer TS 1 W MEI
— PortServer TS 2 W MEI
— PortServer TS 4 W MEI
— PortServer TS 1 M MEI
— PortServer TS 3 M MEI
— PortServer TS 8
— PortServer TS 16 (and Rack models)
— PortServer TS 8 MEI
— PortServer TS 16 MEI