Owner's Manual

27
Power Cables
When connecting the V-10 to your pedals, you must use the correct power cables in
order to ensure proper operation and prevent damage to your pedals.
The standard connector cables (center negative) should be used with DigiTech
®
,
HardWire
®
, Boss
®
, Ibanez
®
, Voodoo Lab
®
, and other common pedals which are capable
of operating using a standard 9VDC battery. This is the standard polarity and most pedals
are wired this way. If you own a pedal from another manufacturer which has the same
connector, but you are unsure of whether or not it is actually wired “center negative”, you
will need to verify this before connecting the pedal to the V-10 to prevent damage to the
pedal. Try looking at the pedal’s power adapter or contact the pedal manufacturer for
verification.
Note: DigiTech pedals that operate using AC power (e.g., original JamMan, JamMan Stereo,
JamMan Delay, Whammy 1 through 4, Timebender, Harmony Man, most RPs, etc.) will need to be
connected to an AC power source using their respective AC power adapters.