Owner's Manual

8
Pedalboard Mounting
When mounting the V-10 to a pedalboard for portable use, the V-10 should be
mounted securely to prevent it from coming loose and being damaged, damaging other
components on the pedalboard, or causing excessive strain on the connected cabling. The
V-10 has been designed to mount seamlessly and securely under Pedaltrain PT-JR/PT-1/
PT-2 style pedalboards. A mounting/drill template is provided with the V-10, simplifying the
mounting procedure. The V-10 can also be mounted underneath Pedaltrain PT-3/PT-Pro
pedalboards using their UBKT-2 Universal Power Supply Mounting Bracket Kit.
To mount the V-10 to a Pedaltrain PT-JR/PT-1/PT-2 pedalboard:
1. Use the included mounting/drill template to drill the holes in the pedalboard
according to the instructions on the template.
2. Using a suitably sized Phillips screwdriver, remove the four screws from the top
of the V-10’s chassis and put them aside.
3. Placing the V-10 under the pedalboard, align the V-10’s screw holes with the
drilled holes in the top/rear of the pedalboard, ensuring that the V-10’s AC
power input is facing towards the rear of the pedalboard.