Owner's Manual

Assigning Pedals to the A-E Footswitches

1. If the Pedalboard window is not already acve, select

it by touching the Pedalboard icon.

2. Touch the Edit buon to display the Edit screen.

3. Touch the eect pedal you would like to assign to the

footswitch and drag it into the desired footswitch slot.

You will noce that the pedal is now visible in the

assigned slot and an icon has appeared over the pedal

indicang which footswitch the pedal is assigned to.

4. Once all pedal assignments have been made, touch

the Performance buon to get back to Performance

mode.

5. From Performance mode you can easily see which

pedals are assigned to each of the A-E footswitches

(see adjacent picture). Pressing any footswitch

will turn it’s assigned pedal on and o and the A-E

footswitch LEDs will provide status for each pedal.

Assigning FootswitchesAssigning Footswitches

NOTE: To remove a footswitch assignment, simply drag the pedal up out of the assigned slot.

2. & 4.