Owner's Manual

19
Single Note Tuning - Strobe Mode
To tune your guitar or bass, one string at a time, follow these steps:
1. Press the Foot Switch to turn the tuner on. The output signal will be
muted while the tuner is on.
2. Play a note on your instrument. The note being played will now show
in the Note Display. If the note is the sharp of the note, a sharp
symbol will appear to the right of the Note Display. The LEDs in
the row that correspond to the string being played will also light in the
LED Display Matrix showing the current notes tuning status.
3. Begin adjusting the tuning of your instrument based on the behavior of
the LEDs in the LED Display Matrix. If LEDs are in motion to the
left, the note displayed is flat and needs to be tuned up. If LEDs are in
motion to the right, the note displayed is sharp and needs to be tuned
down. As the string gets closer to being in tune, with the note displayed,