Owner's Manual

7
7. Mode Button - When the tuner is on, this button is used to select
between the two Display Modes: Normal and Strobe.
8. Note Display - This series of LEDs is used to show the note played
when tuning strings individually and to display the guitar Fret Offset
feature when using a capo or lowered tunings.
9. Foot Switch - Press this Switch to turn the tuner on and off.
10. Foot Switch Release Pins - These two pins are spring-loaded
hinges that hold the Foot Switch in place. Push these pins in with the
tip of a 1/4” guitar cable to release the actuator from the pedal chassis,
exposing the battery compartment.
11. Tuning Button - When the tuner is on, this button is used to select
between the different Tuning options. Pressing and holding the Tuning
button will access the Tuning References.