Owner's Manual

Volume Update
Volume Update lets you maintain relative volume levels between presets
when using the Control 2’s expression pedal as a volume controller. Using
this feature requires that presets have the Control 2’s built-in expression
pedal, an external expression pedal connected to the GSP or Control 2, or a
MIDI expression pedal linked to the Volume Pre or Volume Post parameters
in the GSP’s presets. With Volume Update set to ON, the pedal’s position is
maintained after changing presets thus keeping the relative volume the same
even when the volume is backed off. When Volume Update is set to OFF,
presets are set to the volume level stored with the preset when they are
selected.
To enable or disable the Volume Update option, follow these steps:
From the preset screen, press the Edit/Select knob once to enter the
menu navigation system.
Turn the Edit/Select knob until the Foot Controller menu is highlighted
and press the knob again.
In the Foot Controller menu, highlight Volume Update and press the
Edit/Select knob to turn this option on or off. The default setting is on.
Press the Back button to save this setting.
MIDI CC Send
In addition to controlling GSP processor parameters, you can configure the
Control 2’s Expression Pedal and the CONTROL Footswitch to send MIDI
CC (continuous controller) messages on the GSP’s MIDI channel to MIDI
devices connected to your GSP’s MIDI Thru port. The Expression Pedal can
act as a continuous control device, and the CONTROL Footswitch can act as
a parameter toggle switch.
To enable the MIDI CC send options for the Control 2 Expression Pedal and
the CONTROL Footswitch, follow these steps:
From the preset screen, press the Edit/Select knob once to enter the
menu navigation system.
Turn the Edit/Select knob until the Foot Controller menu is highlighted
and press the knob again.
In the Foot Controller menu, highlight MIDI CC Send and press the
Edit/Select knob. The MIDI CC Send menu appears.
To enable CC send and assign a MIDI CC that the Control 2’s
Expression Pedal will transmit, highlight FC PDL and press the Edit/
Select knob.
Turn the Edit/Select knob to select the desired MIDI CC and press the
1.
2.
3.
4.
1.
2.
3.
4.
5.

Control 2 Owner’s Manual
Using the Control 2 Remote Foot Controller