Bass Multi Chorus Manual 8/20/02 10:43 AM Page 1
Bass Multi Chorus Manual 8/20/02 DECLARATION OF CONFORMITY Manufacturer’s Name: Manufacturer’s Address: DigiTech 8760 S. Sandy Parkway Sandy, Utah 84070, USA 10:43 AM Page 2 Warning For your protection, please read the following: declares that the product: Product name: Bass Multi Chorus Product option: all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent.
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 3 WARRANTY: We at DigiTech are proud of our products and back-up each one with the following warranty: 1.The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal use and service. 3.
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 4 DigiTech has long been known as a leader in the guitar and bass signal processing industry. The Bass Multi Chorus brings you a breakthrough in chorus effect technology. Thanks to our proprietary AudioDNA™ processor, the Bass Multi Chorus is the only pedal that provides up to 16 independent voices of interactive chorusing. The result is a lush wash of modulation that rivals any of the finest pedal and rack chorus devices you have ever heard. 1.
Bass Multi Chorus Manual 1 8/20/02 10:43 AM 2 3 4 5 11 10 9 6 7 8 Page 5
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 6 4. Depth Knob Controls the depth of the chorus effect. Turn this knob clockwise to increase the depth, and counter-clockwise to decrease the depth. 5.Voice Knob Controls the number of chorus voices used. At the knob’s minimum position, only a single chorus voice is heard. As the knob is turned clockwise, more voices are brought in. At the maximum position of the Voice knob, 16 voices are heard interacting with one another. 6.
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 7 8. Pedal Press the pedal to turn the effect on and off. 9. Out 1(Mono) Jack Connect this output to a single bass amplifier or mixer channel panned to the center for mono operation. 10. Indicator LED This LED indicates when the effect is turned on. If the LED becomes dim or does not light when the cables are connected, the battery needs to be replaced. 11. Out 2 Jack Connect this output to a second amplifier or mixer channel for true stereo chorusing.
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 8 Connections The Bass Multi Chorus has a single input and a pair of outputs. Out 1 is used if the Bass Multi Chorus is being connected to only one amplifier or mixer channel. Out 2 is used for stereo operation. Connect Out 1 to the first amplifier or mixer channel panned hard left and Out 2 to the second amplifier or mixer channel panned hard right. The Bass Multi Chorus also has built-in CIT™ cabinet modeling.
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 9
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 10 Battery Replacement 1. Using the tip of a 1/4” cable, push one of the release pins in on either side of the pedal, and remove the pedal from the pedal chassis. 2. Remove the battery from the battery compartment and disconnect the battery cable. 3. Connect a new battery to the battery cable and put it back in the battery compartment. Make sure the battery cable does not interfere with the spring or pedal switch arm. 4.
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 11 Pedal Pedal Switch Arm 9V DC Battery Pedal Release Pin Battery Compartment Spring Pedal Release Pin Pedal Chassis
Bass Multi Chorus Manual 8/20/02 SPECIFICATIONS: • Controls - Level, Speed, Depth,Voice, On/Off Pedal • Jacks - Input, Out 1 (Mono), Out 2 • Input Impedance - 1 MOhms • Output Impedance - 100 Ohms • Power Supply - 9V Alkaline Dry Battery • Power Consumption - 4.8Watts (w/optional PS200R power supply) • Battery Life - Approximately 4 hours (with continuous usage) • Dimensions - 4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H) • Weight - 1.38 lbs.
