Specifications

16
If a thermocouple is not connected or if
the thermocouple is defective, the
display will indicate OPEn.
Thermocouples are sensitive at the tip
or measuring junction. When taking
measurements, allow time for the
reading to stabilize. Multiplying the time
constant of the probe by 5 will give you
the approximate time required.
7. SELECTING TEMPERATURE
SCALE
Select °C or °F by pressing the °C/°F
key. Each time the key is pressed the
temperature scale will switch. Switching
between °C and °F can be done at any
time during operation.
Each time you turn the instrument on, it
will power up with the same settings
that were set when the unit was last
turned off.