User manual

11
Maintenance, Recalibration, and Repair
Cleaning and storage
• The meter should be cleaned with a damp cloth and mild detergent when
necessary. Do not use solvents or abrasives.
• Store the meter in an area within the storage range indicated in the
Specifications chart earlier in this manual.
Battery Replacement
When the battery power falls low, the low-battery icon will appear on the
screen. Replace the 9 V battery in the rear battery compartment by remov-
ing the cover. Ensure that the cover is securely refastened when finished.
It is recommended that Digi-Sense products are calibrated annually to
ensure proper function and accurate measurements; however, your quality
system or regulatory body may require more frequent calibrations. To
schedule your recalibration, please contact InnoCal, an ISO 17025
calibration laboratory accredited by A2LA.
Phone: 1-866-INNOCAL (1-866-466-6225)
Fax: [phone]
E-mail: [e-mail]
Web: InnoCalSolutions.com