User Guide

Safety Precautions
Connection Pin-out
1
2
Ensure the circular multipole plug align with the receptacle on the
sensor module by following the locking guide.
1
Secure the circular multipole plug by screwing it clockwise.
2
Do not use harsh chemicals, strong detergents or cleaning solvents to clean
the device.
Cleaning
Digi-Pas® device is calibrated in the factory for maximum accuracy.
Users can re-calibrate when necessary.
for detail calibration please refer to the Instruction manual available online
Calibration
Kit Contents
Sensor module
Sensor to DB-9 male cable
RS422/485 serial converter
Female DB-9 lead cable
Calibration Certificates
Quick Guide
1
2
3
4
5
6
Sensor DB-9
Male Cable
RS422/485 serial
converter
Female DB-9
lead cable
DESKTOP PC
Sensor module
2-Axis Precision Sensor Module
QUICK START GUIDE
DWL-5000XY
Direct serial RS422/485 connection diagram
6
7
8
9
1
5
3
4
JQC-2-05002-99-005
Download manual/quick guide:
Handbuch/Schnellanleitung herunterladen:
日本語のマニュアルは以下よりご確認下さい。
下载手册/快速指南:
https://www.digipas.com/manual5000xy
DWL-5000XY PC sync software
DWL-5000XY PC Sync Software Basic Edition is available free for download at
digipas.com website.
6 7 8 9
1 53 42
Sensor DB-9 Male cable connector pin-out
GND
N.C (No Connection)
GND (without Control Box) or Signal 1 (For Control Box only)
GND (without Control Box) or Signal 2 (For Control Box only)
Power Input (Regulated 9V DC)
RS485 - A (Non-inverting Receiver Input/Tx+)
RS485 - B (Inverting Receiver Input/Tx-)
RS485 - Z (Inverting Driver Output)/Rx-)
RS485 - Y (Noninverting Driver Output / Rx+)
1
2
3
4
5
6
7
8
9
DescriptionPin No.
Pinout of the circular multipole connector of the tilt sensor module
Warranty
Digi-Pas® Digital level is warranted to the original purchaser to be free from defects in
workmanship and material. JSB Tech will, at its option, repair or replace any defective part
which may malfunction under normal and proper use within a warranty period of 1 (one)
year from the date of shipment. This one-year warranty clause is NOT applicable to
European Union (EU) member states. Purchases made in EU member states will be covered
by the existing consumer laws across the European Union, which provide statutory
warranty rights in addition to the coverage of one year warranty period. The foregoing
warranty shall not apply to defects resulting from misuse, abuse, or transfer by the Buyer,
Buyer-supplied software or interfacing, or unauthorized modification or operation outside
of environmental specifications for the product. JSB Tech does not warrant that the
operation of the instrument software, or firmware, will be uninterrupted or error-free. The
exclusive remedy under any and all warrants and guarantees expressed herein, and we
shall not be liable for damages from loss or delay of equipment uses, consequential, or
incidental damage. No other warranty is expressed or implied. JSB Tech specifically
disclaims the implied warranties of merchantability and fitness for a particular purpose.
Multiple sensor connection diagram using control box
DESKTOP PC
Sensors module
Notes :
-
-
Product specification and appearance are subject to change for product improvement without prior notice.
Control Box is required
PC SYNC SOFTWARE & DRIVER :
DWL-5000XY Instruction manual/Programing guide
INSTRUCTION
MANUAL
Quick guide and instruction manual & device driver are available at
digipas.com website:
SAMPLE CODE:
https://www.digipas.com/pcsync5000xy
https://www.digipas.com/samplecode
https://www.digipas.com/manual5000xy
URL:
Note:
https://www.digipas.com/pcsync5000xy
Converter driver available at digipas website visit:
Technical Support
Email : [e-mail]
DC 9V
power adaptor
DC 12V power
adaptor
Technical Specification
Power Voltage
Output Mode
Waterproof Rating
Operating Temperature
Storage Temperature
Weight (Approx.)
Dimension (mm)
RS485 (full duplex)
9V ±1V DC
IP65
-20°C to +70°C
-30°C to +80°C
350g
90 x 60 x 33
USB, RS232, and SPDT Relay.
Wireless Bluetooth connectivity (optional)
T/R+ T/R- RxD+ RxD- GND VCC
Rx-Rx+ Tx-Tx+
DC9V
GND