User guide

664 User Guide and Technical Information
41
# Parameter Name Description Options
5
Max File Size
Selects the file size when the 664 will close, then
start a new file. The 664 will not record a file
larger than the selected size.
The largest file permissible with the 664’s FAT32
file system is 4 GB
» 4GB
• 2GB
• 1GB
• 640MB
• 512MB
6
Scene Increment Mode
Selects which format the scene increments will
use. To quickly increment a scene name press
and hold the Headphone Encoder then slide the
Transport Control right (Fast Forward)
• Disabled
• Character
• Numeric
7
Take Reset Mode
Defines when take numbers are reset. Reset
brings take number to <1>
• Never
• Scene Change
• Daily Folder Change
» Either Scene or Daily
8
File Playback Mode
Determines what (If any) playback action the 664
will perform upon reaching the end of a file during
playback.
» Disabled
• Play All
• Repeat One
• Repeat All
9
Default Playback Card
The source media that files will be played from
when playback is initiated.
»CF
• SD
10
Erase/Format CF
Formats CF card to FAT32 file system.
11
Erase/Format SD
Formats SD card to FAT32 file system.
System
# Parameter Name Description Options
1
Tone Level
The level of the 664’s internal tone generator. • 0-20 dBu (1 dBu increment)
» 0 dBu
2
Tone Frequency
The audio frequency of the 664’s internal tone
generator.
• 100-10000 Hz (10 Hz increment)
» 1000 Hz
3
Tone Mode
Continuous tone generates tone a the set tone level
to all bus tracks. L Ident mode pulses the amplitude of
tone to the Left channel of the Master Bus by -20dB.
» Continuous
• L Ident
4
Warning Bell Level
The level of warning bell signals in the Headphones. • Off, -60 to -12 dBFS
(1dB increment)
» -30 dBFS
5
Record/Stop Bell
Alerts the user with one beep at the start of recording
and two beeps when the recording is stopped
• Off
»On
6
Meter Ballistics
Selects among the two different meter ballistics set-
tings.
• VU Only
» Peak + VU
7
Meter Peak Hold Time
Adjusts the duration for which the peak indicator stays
illuminated.
» 1 sec
• 2 sec
• 3 sec
• 4 sec
• 5 sec
• Infinity
8
LED Brightness
Adjust the brightness of all LED’s. • 5-100%
(5% increment)
» 60%
9
LCD Brightness
Adjusts the brightness of the LCD backlight. • 5-100%
(5% increment)
» 100%
10
Time Format
Select 12 hour clock or 24 hour clock.
» 12hr
• 24hr