User guide

664 User Guide and Technical Information
21
Tracks ready for recording (armed tracks) have a red label. Tracks not assigned for recording (dis-
armed tracks) have a gray label. To toggle the armed status of a track, turn the Select Encoder to
highlight the track, press and hold the Meter bu on, then push the Select Encoder. The background
color of the track will change to indicate the new arming status. If an input is off (Trim Control fully
counter-clockwise or Input Selection set to Off ), the track label will be black.
Master Bus and Aux Bus meters are not shown on the Main Screen when the CL-6 Input Expander is at-
tached.
See CL-6 Input Expander
Track-to-Media Routing
The 664 supports simultaneous recording to CF and SD media. See Recording Media for details. By de-
fault, all armed tracks are recorded to both cards as a polyphonic WAV fi le. Recording options are set
independently for each memory card from the Setup Menu items RECORDER > Record to CF and
RECORDER > Record to SD. Each item can be set to the following se ings:
Setting Tracks Recorded File(s) Generated
Off None (0 tracks) No file
Wav Poly All armed tracks (0-16 tracks) Polyphonic WAV file
Wav Poly (ISOs only) Armed ISO tracks (0-12 tracks) Polyphonic WAV file
Wav Poly (LR only) Armed L and R tracks (0-2 tracks) Polyphonic WAV file
Wav Poly (X1X2 only) Armed X1 and X2 tracks (0-2 tracks) Polyphonic WAV file
MP3 (LR) Armed L and R tracks (0-2 tracks) 2-track MP3 file
MP3 (X1X2) Armed X1 and X2 tracks (0-2 tracks) 2-track MP3 file
Track counts shown are the maximum tracks possible with the CL-6 Input Expander a ached. See CL-6
Input Expander
Track Naming
Track names are stored in the metadata of each recorded fi le. The following list displays the default
track names:
• Track L: MixL
• Track R: MixR
• Track X1: Aux1
• Track X2: Aux2
• Track 1: Ch1
• Track 2: Ch2
• Track 3: Ch3
• Track 4: Ch4
• Track 5: Ch5
• Track 6: Ch6
• Track 7: Ch7
• Track 8: Ch8
• Track 9: Ch9
• Track 10: Ch10
• Track 11: Ch11
• Track 12: Ch12
Track names of previously recorded fi les and track names of all subsequently recorded fi les can be
edited. To rename tracks:
1. Enter the Take List (Press and hold the Menu Bu on then press the Headphone Encoder or
FILE STORAGE > Take List)
2. To edit track names of subsequently recorded fi les, highlight the next take (indicated by
orange text and the phrase “[next]”) and slide the RTN Switch. To edit the track names of a
previously recorded take, highlight that take.
3. Slide the RTN Switch to edit the metadata. Rotate the Headphone Encoder to select the track
to be renamed, and press the Headphone Encoder to edit the track name.