User manual

26
27
load to the Digi-Frame™.
Select the Image.
Click the Open button.
Digi-Link™ also supports “drag
and drop.”
Find the icon for the JPEG
image that you want to include
in the Slideshow.
Drag the icon from the desk-
top or any explorer window to
the “Images To Send” window.
The name of the image will
appear in the list.
The original file will remain in
the directory where it was.
Repeat this process until you
have selected all of the JPEG
images that you wish to
download.
Removing images from the Images To Transfer list:
Click on the name of the file to Select the JPEG file that you wish to
remove.
Once it is highlighted, click on the Remove button to remove the JPEG
Image from the list of images to transfer to the Digi-Frame™.
Sending pictures to the Digi-Frame™:
Once all of the JPEG images are listed in the Images To Transfer window;
click the Send button to transfer the images to the Digi-Frame™.
Quitting Digi-Link:
Choosing quit from the File menu will quit the Digi-Link program.
Clicking on the close window box in the upper left corner will also quit the
Digi-Link Program.
IMPORTANT: Be sure to transfer all of the images that you want to trans-
fer before quitting Digi-Link. Digi-Link does not save the list of items in the
“Images To Transfer” box.
The JPEG files on your PC will be left untouched.
For IBM Compatible PCs:
Installing Digi-Link™:
Place the Digi-Link CD that comes with the Digi-Frame™ in your PC’s CD-
ROM drive.
Open the Digi-Link CD.
Read the “Read Me” file for last-minute information that may not be includ-
ed in this manual.
Open the Folder “PC”
Drag the Digi-Link icon to wherever you want to save it on your hard drive.
Running Digi-Link Software:
Left click on the Digi-Link Icon, and select open from the menu.
Click on the Digi-Link splash screen to continue.
Digi-Link will Automatically scan to see if the Digi-Frame™ is connected to
the selected COM port.
A window labeled Images To Send will appear. This is the primary control
for Digi-Link Software.
Choosing the COM Port:
Digi-Link should auto-detect which
Communications port you have connected to
the Digi-Frame™, in order to transfer digital
pictures to it. If it doesn’t you can choose the
COM port manually.
Run Digi-Link
Click the Choose button on the Images to Send window.
A dialogue box will appear, asking you to “Please enter the name of the
Communications port to which the Digi-Frame™ is attached.” Choose the
COM Port that the Digi-Frame™ is attached to from the pull down menu.
Click OK.
To Download Pictures to the Digi-Frame™:
Connect one end of the Digi-Link serial cable to the serial port on your PC;
then connect the other end to the Digi-Link port on your Digi-Frame™.
Run Digi-link software.
In the Images To Send window, Find the Add... button.
Click on the Add... button, locate the JPEG image that you want to down-