User manual

Menu Overview
R&S
®
RTO
777User Manual 1316.0827.02 ─ 06
A.2 Horizontal Menu
Menu item Description Corresponding key
Time Base
chapter 2.3.1.1, "Time Base", on page 27
HORIZONTAL
Resolution
chapter 2.3.1.2, "Resolution", on page 29
RES / REC LEN
Acquisition
chapter 2.3.1.3, "Acquisition", on page 31
ACQUISITION
Ultra Segmentation
chapter 2.3.1.4, "Ultra Segmentation", on page 35
FFT Setup
chapter 6.3.3.1, "FFT Setup", on page 198
Reference
chapter 2.3.5.1, "Reference (OCXO, Option RTO-
B4)", on page 51
Skew
chapter 2.3.5.2, "Skew", on page 51
A.3 Trigger Menu
Menu item Description Corresponding key
Trigger Events Setup
chapter 3.3.1, "Events", on page 58
TRIGGER
Trigger Slope Opens a dialog box to select the slope or polarity, and
the trigger type.
SLOPE
Trigger Mode Selects the trigger mode in the submenu. AUTO/NORMAL
Trigger Source Opens a dialog box to select the trigger source.
"Source" on page 59
SOURCE
Trigger Type Selects the trigger type in the submenu.
Force Trigger Provokes an immediate single acquisition to confirm
that a signal is available. Use the waveform display to
determine how to trigger on it.
Trigger Qualification
chapter 3.3.2, "Trigger Qualification", on page 77
Trigger Noise Reject
chapter 3.3.3, "Noise Reject", on page 79
Trigger Sequence
chapter 3.3.4, "Sequence", on page 80
Trigger Position
chapter 3.3.5, "Trigger Position", on page 83
Trigger Control
chapter 3.3.6, "Control", on page 85
Digital Filter
chapter 2.3.4, "Digital Filter Setup", on page 49
Horizontal Menu