User manual

Remote Control
R&S
®
RTO
769User Manual 1316.0827.02 ─ 06
Parameters:
<ComputerName> Name string
DIAGnostic:SERVice:PARTnumber <MaterialNumber>
Returns the material number of your instrument. This number is required to order a new
option, and in case of service.
Parameters:
<MaterialNumber> Number string
DIAGnostic:SERVice:SERialnumber?
Returns the serial number of your instrument. This number is required to order a new
option, and in case of service.
Return values:
<SerialNumber> Number string
Usage: Query only
SYSTem:VERSion?
Queries the SCPI version number to which the instrument complies. The instrument
complies to the final SCPI version 1999.0.
Usage:
Query only
SCPI confirmed
SYSTem:DFPRint [<Path>]
The device footprint contains the configuration of the instrument, installed modules,
installed software and software licenses. This information is written in the device footprint
xml file might be useful in case of maintenance or support request.
The query returns the information as block data. The setting command saves the device
footprint xml file in the specified path.
It is also possible to access the device footprint xml file via the LXI web browser. There-
fore, the directory containing the xml file must be enabled for sharing.
Setting parameters:
<Path> String parameter, specifying the target path of the footprint file.
Return values:
<DeviceFootprint> Content of the device footprint xml file as block data
SYSTem:ERRor:ALL?
Queries the error/event queue for all unread items and removes them from the queue.
The response is a comma separated list of error number and a short description of the
error in FIFO order.
Command Reference