User manual

Remote Control
R&S
®
RTO
765User Manual 1316.0827.02 ─ 06
HCOPy:PAGE:ORIentation<1..2> <Orientation>
Defines the page orientation for output of the display image to a printer.
To set the output to printer, use HCOPy:DESTination<1..2> with parameter
'SYST:COMM:PRIN'.
Suffix:
1..2
.
Selects the output configuration.
Parameters:
<Orientation> PORTrait | LANDscape
*RST: LANDscape
HCOPy:
DEVice<m>:COLor <Color>
Selects between color and monochrome printing of the display image.
To set the output to printer, use HCOPy:DESTination<1..2> with parameter
'SYST:COMM:PRIN'.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<Color> ON | OFF
ON: Color output
OFF: Black and white output
*RST: ON
HCOPy:DEVice<m>:INVerse <InverseColor>
Inverts the colors of the output, i.e. a dark waveform is printed on a white background.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<InverseColor> ON | OFF
*RST: ON
Firmware/Software: V 1.27
HCOPy:CMAP<m>:DEFault <PrintColorSet>
Defines the default color set for printing of the display image.
To set the output to printer, use HCOPy:DESTination<1..2> with parameter
'SYST:COMM:PRIN'.
Command Reference