User manual

Remote Control
R&S
®
RTO
764User Manual 1316.0827.02 ─ 06
Parameters:
<Medium> MMEM | SYST:COMM:PRIN | SYST:COMM:CLIP
String parameter
MMEM
Directs the display image to a file. The MMEMory:NAME command
defines the file name. The file format is defined with HCOPy:
DEVice<m>:LANGuage.
SYST:COMM:PRIN
Directs the display image to the printer. The printer is selected with
the SYSTem:COMMunicate:PRINter:SELect<1..2> com-
mand. The HCOPy:DESTination command should always be
sent after setting the printer.
SYST:COMM:CLIP
Directs the hardcopy to the clipboard.
*RST:
SYST:COMM:CLIP
Example:
HCOP:DEST 'SYST:COMM:PRIN'
See also: "Saving a screenshot to file" on page 763
MMEMory:NAME <FileName>
Defines the file name when an image of the display is stored to a file rather than printed
to a printer using the HCOPy:IMMediate<m>[:DUM] command.
Setting parameters:
<FileName> String parameter specifiying path and file name of the screenshot
Example:
"Saving a screenshot to file" on page 763
Usage: Setting only
SCPI confirmed
HCOPy:DEVice<m>:LANGuage <FileFormat>
Defines the file format for output of the display image to file.
To set the output to file, use HCOPy:DESTination<1..2> with parameter 'MMEM'.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<FileFormat> PNG | JPG | BMP | TIFF | PDF
*RST: PNG
Example:
"Saving a screenshot to file" on page 763
Command Reference