User manual

Remote Control

R&S

RTO

744User Manual 1316.0827.02 ─ 06

Parameters:

SERPattern

*RST: EDGE

TRIGger<m>:PARallel:DATatoclock:CSOurce[:VALue] <ClockSource>

TRIGger<m>:PARallel:STATe:CSOurce:VALue <ClockSource>

TRIGger<m>:PARallel:SPATtern:CSOurce[:VALue] <ClockSource>

Selects the digital channel of the clock signal.

Suffix:

<m>

1..3

Event in a trigger sequence: 1 = A-event only

Parameters:

<ClockSource> D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 |

D13 | D14 | D15

*RST: D0

TRIGger<m>:PARallel:EDGE:EXPRession[:DEFine] <LogicalExpr>

TRIGger<m>:PARallel:WIDTh:EXPRession[:DEFine] <LogicalExpr>

TRIGger<m>:PARallel:TIMeout:EXPRession[:DEFine] <LogicalExpr>

TRIGger<m>:PARallel:STATe:EXPRession[:DEFine] <LogicalExprSigns>

TRIGger<m>:PARallel:PATTern:EXPRession[:DEFine] <LogicalExprSigns>

TRIGger<m>:PARallel:SPATtern:EXPRession[:DEFine] <LogicalExpr>

Defines a logical combination of several digital channels as trigger condition if 

TRIGger<m>:SOURce is set to LOGIC.

Suffix:

<m>

1..3

Event in a trigger sequence: 1 = A-event only

Parameters:

<LogicalExpr> String with logical expression

Example:

TRIGger:PARallel:EDGE:EXPRession 'D1 and D2'

Usage: SCPI confirmed

Edge Trigger