User manual

Remote Control
R&S
®
RTO
738User Manual 1316.0827.02 ─ 06
BUS<m>:FLXRay:FRAMe<n>:TRANslation?
Returns the label of the specified frame if translation is enabled.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame, number of the frame in the current acquisition,
1...n.
Return values:
<Translation> String with the ID Name (label)
Example:
BUS:FLXRay:FRAMe2:TRANslation?
Response: Temperature
Usage: Query only
Firmware/Software: FW 1.35
16.2.15
Mixed Signal Option (MSO, R&S RTO-B1)
This chaptes decribes the remote commands of MSO option R&S RTO-B1.
● Digital Channels....................................................................................................738
● Parallel Bus Configuration.....................................................................................739
● Trigger...................................................................................................................742
16.2.15.1 Digital Channels
DIGital<m>:LABel..........................................................................................................738
DIGital<m>:DESKew......................................................................................................739
DIGital<m>:THReshold...................................................................................................739
DIGital<m>:HYSTeresis..................................................................................................739
DIGital<m>:LABel <Label>
Sets a name for the indicated digital channel. The name is displayed in the diagram.
Suffix:
<m>
.
0..15
Number of the digital channel
Parameters:
<Label> String containing the channel label
Firmware/Software: V 1.30
Command Reference