User manual

Remote Control
R&S
®
RTO
736User Manual 1316.0827.02 ─ 06
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:CSSTate?
Returns the state of the cyclic redundancy check code of the header data.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<HeaderCRCstate> OK | UVAL | INSufficient
OK: the CRC is valid.
UVAL: unexpected value
INSufficient: the frame is not completely contained in the acquisi-
tion. The decoded part of the frame is valid.
*RST: OK
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:CSValue?
Returns the checksum value of the header CRC.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<HeaderCRCvalue>
To set the value format, use FORMat:BPATtern on page 427.
The values below – range, increment and default – are decimal
values.
Range: 0 to 2047
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:FCSTate?
Returns the state of the cyclic redundancy check code of the frame data.
Suffix:
<m>
.
1..4
Selects the serial bus.
Command Reference