User manual

Remote Control
R&S
®
RTO
735User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<FrameIDvalue>
To set the value format, use FORMat:BPATtern on page 427.
The values below – range, increment and default – are decimal
values.
Range: 0 to 2047
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:PAYLength?
Returns the payload length, the number of data words in the payload segment. Informa-
tion is transmitted in 2-byte words, so the number of data bytes in the payload segment
is twice the payload length.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<Value> Range: 0 to 127
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:CYCount?
Returns the number of the current FlexRay cycle.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<CycleCount> Range: 0 to 63
Increment: 1
*RST: 0
Command Reference