User manual

Remote Control
R&S
®
RTO
724User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<PayloadPreamble> ONE | ZERO | DC
Bit value: 1, 0, or X (don't care)
*RST: ONE
TRIGger<m>:FLXRay:NUFRame <NullFrame>
Triggers on the null frame indicator bit, a frame without usable data.
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<NullFrame> ONE | ZERO | DC
Bit value: 1, 0, or X (don't care)
*RST: ZERO
TRIGger<m>:FLXRay:SYFRame <SyncFrame>
Triggers on the sync frame used for synchronization of the FlexRay system. Only sync
nodes can send this frame type.
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<SyncFrame> ONE | ZERO | DC
Bit value: 1, 0, or X (don't care)
*RST: DC
TRIGger<m>:FLXRay:STFRame <StartupFrame>
Triggers on startup frames used for startup of the network. Only specific start nodes can
send this frame type.
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<StartupFrame> ONE | ZERO | DC
Bit value: 1, 0, or X (don't care)
*RST: DC
Command Reference