User manual

Remote Control
R&S
®
RTO
720User Manual 1316.0827.02 ─ 06
Parameters:
<PresetSingleEnded> CM2500mv150mv | CM2500mv200mv | CM2500mv250mv |
CM2500mv300mv | MAN
CM2500mv150mv | CM2500mv200mv | CM2500mv250mv |
CM2500mv300mv
2.5 ± 0.15 V; 2.5 ± 0.2 V; 2.5 ± 0.25 V; 2.5 ± 0.3 V, respectively
MAN
Manual setting of user-defined values with BUS<m>:FLXRay:
THReshold<n> on page 718.
*RST: CM2500mv150mv
BUS<m>:
FLXRay:PRDiff <PresetDifferential>
Selects a default threshold voltage if BUS<m>:FLXRay:SRCType is set to
DIFFerential.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<PresetDifferential> MV150 | MV200 | MV250 | MV300 | MAN
MV150 | MV200 | MV250 | MV300
±150 mV, ±200 mV, ±250 mV, ±300 mV respectively
MAN
Manual setting of user-defined values with BUS<m>:FLXRay:
THReshold<n> on page 718.
*RST: MV150
BUS<m>:FLXRay:PRLogic <PresetLogic>
Selects a default threshold voltage if BUS<m>:FLXRay:SRCType is set to LOGic.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<PresetLogic> V25 | V165 | V125 | V09 | V0 | MAN
V25 | V165 | V125 | V09 | V0
2.5 V (CMOS 5.0 V); 1.65 V (CMOS 3.5V), 1.25 V (CMOS 2.5V),
0.9 V (CMOS 1.8V), 0 V (ground)
MAN
Manual setting of user-defined values with BUS<m>:FLXRay:
THReshold<n> on page 718.
*RST: V25
Command Reference