User manual

Remote Control
R&S
®
RTO
714User Manual 1316.0827.02 ─ 06
Return values:
<IdentifierParity>
To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal val-
ues.
Range: 0 to 3
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:
LIN:FRAMe<n>:SYSTate?
Returns the state of the sync field for the specified frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<SyncState> OK | STERror | SPERror | UVAL | NOEXists | INSufficient
STERror: start error
SPERror: stop error
UVAL: unexpected value
NOEXists: byte does not exist
INSufficient: the frame is not completely contained in the acquisi-
tion. The decoded part of the frame is valid.
*RST: OK
Usage: Query only
BUS<m>:LIN:FRAMe<n>:CSSTate?
Returns the checksum state of the specified frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Command Reference