User manual

Remote Control
R&S
®
RTO
695User Manual 1316.0827.02 ─ 06
Return values:
<FrameState> OK | BTST | CRCD | ACKD | CRC | EOFD | NOACk | CAERror |
FCERor | INSufficient
OK: the frame is valid.
BTST: Bit stuffing error occured.
CRCD: Wrong CRC delimiter occured.
ACKD: Wrong ACK delimiter occured.
CRC: Cyclic redundancy check failed.
EOFD: Wrong end of frame.
NOACK: Acknowlegde is missing.
CAERror: CRC error followed by an acknowledgement error
(missing acknowledge)
FCERor: CRC error followed by a form error (wrong CRC delimiter
or wrong ACK delimiter)
INSufficient: The frame is not completely contained in the acqui-
sition. The acquired part of the frame is valid.
*RST:
OK
Usage: Query only
BUS<m>:CAN:FRAMe<n>:STARt?
BUS<m>:CAN:FRAMe<n>:STOP?
Return the start time and stop time of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<FrameStart>
<FrameStop>
Time
Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:CAN:FRAMe<n>:TYPE?
Returns the frame type of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Command Reference