User manual

Remote Control
R&S
®
RTO
671User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<MOSIPattern>
Numeric or string pattern, see chapter 16.2.2.6, "Bit Pattern
Parameter", on page 421. The string parameter accepts the bit
value X (don't care).
Usage: Asynchronous command
Decoding Results (Option R&S RTO-K1)
BUS<m>:SPI:FRAMe<n>:DATA......................................................................................671
BUS<m>:SPI:FCOunt.....................................................................................................671
BUS<m>:SPI:FRAMe<n>:STATus...................................................................................672
BUS<m>:SPI:FRAMe<n>:STARt.....................................................................................672
BUS<m>:SPI:FRAMe<n>:STOP......................................................................................672
BUS<m>:SPI:FRAMe<n>:WCOunt..................................................................................673
BUS<m>:SPI:FRAMe<n>:WORD<o>:STARt....................................................................673
BUS<m>:SPI:FRAMe<n>:WORD<o>:STOP.....................................................................674
BUS<m>:SPI:FRAMe<n>:WORD<o>:MISO......................................................................674
BUS<m>:SPI:FRAMe<n>:WORD<o>:MOSI......................................................................674
BUS<m>:SPI:FRAMe<n>:DATA?
Returns the data words of the specified frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Parameters:
<Data> Comma-separated list of data words. To set the value format, use
FORMat:BPATtern.
Usage: Query only
Asynchronous command
BUS<m>:SPI:FCOunt?
Returns the number of decoded frames.
Suffix:
<m>
.
1..4
Selects the serial bus.
Return values:
<Count> Total number of decoded frames.
Command Reference