User manual

Remote Control
R&S
®
RTO
669User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<DataAlignment> WORD | BIT
WORD
The pattern is matched only at word boundaries.
BIT
Bit-by bit: the pattern can be at any position in the data word.
*RST: WORD
Usage: Asynchronous command
TRIGger<m>:SPI:DPOPerator <DataPosiOperator>
Sets the operator for the data position. You can defined an exact position, or a position
range.
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<DataPosiOperator> ANY | EQUal | NEQual | GETHan | INRange
ANY
The position of the required pattern is not relevant.
EQUal | NEQual | GETHan
Equal, Not equal, Greater or equal than. These conditions require
one data position to be set with TRIGger<m>:SPI:DPOSition.
INRange
Set the minimum and maximum value of the range with 
TRIGger<m>:SPI:DPOSition and TRIGger<m>:SPI:DPTO.
*RST: ANY
TRIGger<m>:SPI:DPOSition <DataPosition>
Sets the number of bits or words to be ignored before the first bit or word od interest. The
effect is defined by TRIGger<m>:SPI:PALignment.
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<DataPosition> The index 0 is associated with the first data byte.
Range: 0 to 4095 for triggering on one line (MISO or MOSI),
2047 for triggering on both lines.
Increment: 1
*RST: 0
Command Reference