User manual

Remote Control
R&S
®
RTO
668User Manual 1316.0827.02 ─ 06
Parameters:
<ClockTimeout> Range: 50E-9 to 10
Increment: 1E-6
*RST: 1E-3
Default unit: s
Trigger
TRIGger<m>:SPI:MODE.................................................................................................668
TRIGger<m>:SPI:PALignment.........................................................................................668
TRIGger<m>:SPI:DPOPerator.........................................................................................669
TRIGger<m>:SPI:DPOSition...........................................................................................669
TRIGger<m>:SPI:DPTO.................................................................................................670
TRIGger<m>:SPI:FCONdition.........................................................................................670
TRIGger<m>:SPI:MISopattern.........................................................................................670
TRIGger<m>:SPI:MOSipattern........................................................................................670
TRIGger<m>:SPI:MODE <Type>
Selects the trigger type for SPI analysis.
Suffix:
<m>
.
1..3
Event in a trigger sequence: 1 = A-event only
Parameters:
<Type> SSACtive | TIMeout | MOSI | MISO | MOMI
SSACtive
Start of the message: slave select signal SS changes to the active
state.
TIMeout
Triggers on the next message start after the "Timeout" time.
MOSI
Triggers on a specified data pattern in that is expected on the
MOSI line. Define the pattern with TRIGger<m>:SPI:
MOSipattern.
MISO
Triggers on a specified data pattern in that is expected on the
MISO line. Define the pattern with TRIGger<m>:SPI:
MISopattern
MOMI
Triggers on a specified data patterns on the MISO and MISO lines.
*RST:
SSACtive
Usage: Asynchronous command
TRIGger<m>:SPI:PALignment <DataAlignment>
Defines how the specified data pattern is searched.
Command Reference