User manual

Remote Control
R&S
®
RTO
664User Manual 1316.0827.02 ─ 06
BUS<m>:SPI:WSIZe <WordLength>
Sets the number of bits in a message.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<WordLength> Number of bits
Range: 4 to 32
Increment: 1
*RST: 8
Usage: Asynchronous command
BUS<m>:SPI:SCLK:SOURce <SSsource>
Sets the input channel of the clock line.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<SSsource> NONE | C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | R1 |
R2 | R3 | R4
See chapter 16.2.2.2, "Waveform Parameter", on page 419
*RST: NONE
Usage: Asynchronous command
BUS<m>:SPI:SSELect:SOURce <SSsource>
Sets the input channel of the Slave Select line.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<SSsource> NONE | C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | R1 |
R2 | R3 | R4
See chapter 16.2.2.2, "Waveform Parameter", on page 419
*RST: NONE
Usage: Asynchronous command
Command Reference