User manual

Remote Control
R&S
®
RTO
662User Manual 1316.0827.02 ─ 06
Usage: Query only
BUS<m>:I2C:FRAMe<n>:BYTE<o>:VALue?
Returns the data value of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<ByteData>
To set the value format, use FORMat:BPATtern.
The values below – range, increment and default – are decimal
values.
Range: 0 to 255
Increment: 1
*RST: 0
Usage: Query only
Translation (Option R&S RTO-K1)
BUS<m>:SHOWtrans <UseTranslation>
Activates the protocol translation file to be used for decoding.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<UseTranslation> ON | OFF
*RST: OFF
Usage: Asynchronous command
Firmware/Software: FW 1.35
BUS<m>:I2C:FRAMe<n>:TRANslation?
Returns the label of the specified frame if translation is enabled.
Suffix:
<m>
.
1..4
Selects the serial bus.
Command Reference