User manual

Remote Control
R&S
®
RTO
661User Manual 1316.0827.02 ─ 06
<o> *
Selects the byte number.
Return values:
<ByteAckBitStart>
To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal val-
ues.
Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:
I2C:FRAMe<n>:BYTE<o>:COMPlete?
Returns if the indicated byte is completely contained in the acquisition.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<ByteComplete> ON | OFF
*RST: OFF
Usage: Query only
BUS<m>:I2C:FRAMe<n>:BYTE<o>:STARt?
Returns the start time of the specified data byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<ByteStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Command Reference