User manual

Remote Control
R&S
®
RTO
657User Manual 1316.0827.02 ─ 06
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<AddressValue>
To set the value format, use FORMat:BPATtern.
The values below – range, increment and default – are decimal
values.
Range: 0 to 2047
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:I2C:FRAMe<n>:ADEVice?
Returns the pure device address of the indicated frame without the R/W bit.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<DevAddressValue>
To set the value format, use FORMat:BPATtern.
The values below – range, increment and default – are decimal
values.
Range: 0 to 1023
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:I2C:FRAMe<n>:AMODe?
Returns the address length.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<AddressType> BIT7 | BIT7_RW | BIT10 | AUTO | ANY
*RST: BIT7
Command Reference