User manual

Remote Control
R&S
®
RTO
631User Manual 1316.0827.02 ─ 06
SEARch:TRIGger:LEVel:WINDow:LOWer <Key>, <SignalSource>, <Value>
SEARch:TRIGger:LEVel:WINDow:LOWer? <Key>, <SignalSource>
Sets the lower voltage limit for the window.
Parameters:
<Value> Voltage value
Parameters for setting and query:
<Key> Search definition
<SignalSource> NONE | C1W1 | C1W2 | C1W3 | C2W1 | C2W2 | C2W3 | C3W1 |
C3W2 | C3W3 | C4W1 | C4W2 | C4W3 | M1 | M2 | M3 | M4 | R1 |
R2 | R3 | R4
Source of the search, see chapter 16.2.2.2, "Waveform Parame-
ter", on page 419
*RST: NONE
Usage: SCPI confirmed
SEARch:TRIGger:LEVel:WINDow:UPPer <Key>, <SignalSource>, <Value>
SEARch:TRIGger:LEVel:WINDow:UPPer? <Key>, <SignalSource>
Sets the upper voltage limit for the window.
Parameters:
<Value> Voltage value
Parameters for setting and query:
<Key> Search definition
<SignalSource> NONE | C1W1 | C1W2 | C1W3 | C2W1 | C2W2 | C2W3 | C3W1 |
C3W2 | C3W3 | C4W1 | C4W2 | C4W3 | M1 | M2 | M3 | M4 | R1 |
R2 | R3 | R4
Source of the search, see chapter 16.2.2.2, "Waveform Parame-
ter", on page 419
*RST: NONE
Usage: SCPI confirmed
16.2.13.4 Trigger Level
SEARch:TRIGger:LEVel[:VALue].....................................................................................631
SEARch:TRIGger:FINDlevel............................................................................................632
SEARch:TRIGger:LEVel[:VALue] <Key>, <SignalSource>, <Value>
SEARch:TRIGger:LEVel[:VALue]? <Key>, <SignalSource>
Sets the voltage level for the trigger level that is used to determine other parameters.
Command Reference