User manual

Remote Control
R&S
®
RTO
629User Manual 1316.0827.02 ─ 06
SEARch:TRIGger:LEVel:WINDow:UPPer.........................................................................631
SEARch:TRIGger:WINDow:DELTa <SearchName>,<WidthDelta>
SEARch:TRIGger:WINDow:DELTa? <SearchName>
Defines a range around the "Width" value (see SEARch:TRIGger:WINDow:WIDTh
on page 630).
Parameters:
<WidthDelta> Range: 0 to 432
Increment: 500E-12
*RST: 0
Default unit: s
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:TRIGger:WINDow:RANGe <SearchName>,<RangeMode>
SEARch:TRIGger:WINDow:RANGe? <SearchName>
Selects how the signal run is compared with the window.
Parameters:
<RangeMode> ENTer | EXIT | WITHin | OUTSide
ENTer
Triggers when the signal crosses the upper or lower level and thus
enters the window made up of these two levels.
EXIT
Triggers when the signal leaves the window.
WITHin
Triggers if the signal stays between the upper and lower level for
a specified time. The time is defined in various ways by the 
SEARch:TRIGger:WINDow:TIMerange command.
OUTSide
Triggers if the signal stays above the upper level or below the
lower level for a specified time. The time is also defined by the 
SEARch:TRIGger:WINDow:TIMerange command.
*RST:
ENTer
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
Command Reference