User manual

Remote Control
R&S
®
RTO
628User Manual 1316.0827.02 ─ 06
Parameters:
<RangeMode> WITHin | OUTSide | SHORter | LONGer
WITHin
Triggers on pulses inside a given range. The range of the pulse
width is defined by "Width" and "±Delta".
OUTSide
Triggers on pulses outside a given range. The range definition is
the same as for "Within" range.
SHORter
Triggers on pulses shorter than the given "Width".
LONGer
Triggers on pulses longer than the given "Width".
*RST:
WITHin
Parameters for setting and query:
<SearchName> Search definition
Example:
See "Searching for a pulse of specified width" on page 611
Usage: SCPI confirmed
SEARch:TRIGger:WIDTh:WIDTh <SearchName>,<Width>
SEARch:TRIGger:WIDTh:WIDTh? <SearchName>
For the ranges "Within" and "Outside", the width defines the center of a range which is
defined by the limits "±Delta".
For the ranges "Shorter" and "Longer", the width defines the maximum and minimum
pulse width, respectively.
The range is defined using SEARch:TRIGger:WIDTh:RANGe.
Parameters:
<Width> Range: 100E-12 to 864
Increment: 100E-9
*RST: 5E-9
Default unit: s
Parameters for setting and query:
<SearchName> Search definition
Example:
See "Searching for a pulse of specified width" on page 611
Usage: SCPI confirmed
Window
SEARch:TRIGger:WINDow:DELTa..................................................................................629
SEARch:TRIGger:WINDow:RANGe.................................................................................629
SEARch:TRIGger:WINDow:TIMerange............................................................................630
SEARch:TRIGger:WINDow:WIDTh..................................................................................630
SEARch:TRIGger:LEVel:WINDow:LOWer........................................................................631
Command Reference