User manual

Remote Control
R&S
®
RTO
627User Manual 1316.0827.02 ─ 06
Usage: SCPI confirmed
Width
SEARch:TRIGger:WIDTh:DELTa.....................................................................................627
SEARch:TRIGger:WIDTh:POLarity..................................................................................627
SEARch:TRIGger:WIDTh:RANGe....................................................................................627
SEARch:TRIGger:WIDTh:WIDTh.....................................................................................628
SEARch:TRIGger:WIDTh:DELTa <SearchName>,<WidthDelta>
SEARch:TRIGger:WIDTh:DELTa? <SearchName>
Defines a range around the given width value (see also SEARch:TRIGger:WIDTh:
WIDTh on page 628).
Parameters:
<WidthDelta> Range: 0 to 432
Increment: 500E-12
*RST: 0
Default unit: s
Parameters for setting and query:
<SearchName> Search definition
Example:
See "Searching for a pulse of specified width" on page 611
Usage: SCPI confirmed
SEARch:TRIGger:WIDTh:POLarity <SearchName>,<Polarity>
SEARch:TRIGger:WIDTh:POLarity? <SearchName>
Indicates the polarity of a pulse, that is the direction of the first pulse slope.
Parameters:
<Polarity> POSitive | NEGative | EITHer
See chapter 16.2.2.4, "Polarity Parameter", on page 420.
*RST: POSitive
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:TRIGger:WIDTh:RANGe <SearchName>,<RangeMode>
SEARch:TRIGger:WIDTh:RANGe? <SearchName>
Selects how the range of a pulse width is defined in relation to the width and delta (see 
SEARch:TRIGger:WIDTh:WIDTh on page 628 and SEARch:TRIGger:WIDTh:
DELTa on page 627).
Command Reference