User manual
Remote Control
R&S
®
RTO
613User Manual 1316.0827.02 ─ 06
Parameters:
<OnlineState> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName> Search definition
SEARch:SOURce <SearchName>,<SearchConditionSrc>
SEARch:SOURce? <SearchName>
Defines the source on which the search conditions are applied. The source can be any
input signal, math or reference waveform.
Parameters:
<SearchConditionSrc>C1W1 | C1W2 | C1W3 | C2W1 | C2W2 | C2W3 | C3W1 | C3W2 |
C3W3 | C4W1 | C4W2 | C4W3 | M1 | M2 | M3 | M4 | R1 | R2 | R3 |
R4
Source of the search, see chapter 16.2.2.2, "Waveform Parame-
ter", on page 419
*RST: NONE
Parameters for setting and query:
<SearchName> Search definition
Example:
See "Searching for a pulse of specified width" on page 611
16.2.13.3 Search Conditions
● Basic.....................................................................................................................613
● Data2Clock............................................................................................................615
● Edge......................................................................................................................617
● Glitch.....................................................................................................................618
● Interval..................................................................................................................619
● Runt.......................................................................................................................620
● Slew Rate..............................................................................................................623
● Timeout.................................................................................................................626
● Width.....................................................................................................................627
● Window.................................................................................................................628
Basic
SEARch:TRIGger:DATatoclock[:STATe]...........................................................................614
SEARch:TRIGger:EDGE[:STATe]....................................................................................614
SEARch:TRIGger:GLITch[:STATe]..................................................................................614
SEARch:TRIGger:INTerval[:STATe].................................................................................614
SEARch:TRIGger:RUNT[:STATe]....................................................................................614
SEARch:TRIGger:SLEWrate[:STATe]..............................................................................614
SEARch:TRIGger:TIMeout[:STATe].................................................................................614
SEARch:TRIGger:WIDTh[:STATe]...................................................................................614
SEARch:TRIGger:WINDow[:STATe]................................................................................614
Command Reference