User manual

Remote Control

R&S

RTO

610User Manual 1316.0827.02 ─ 06

The value is useful if you test a specified number of acquisitions with action "Stop acqui-

sition" on violation, or if the acquisition has been stopped manually.

See also: chapter 8.2.4, "Running a Mask Test", on page 222.

Query parameters:

Return values:

<AcqsRemaining> Range: 0 to 100E+24

Increment: 1

*RST: 0

Usage: Query only

MTESt:RESult:COUNt:FWAVeforms? <MaskTestName>

Returns the number of acquisitions that contained at least one sample hit.

Query parameters:

Return values:

<AcquisitionHits> Range: 0 to 100E+24

Increment: 1

*RST: 0

Usage: Query only

MTESt:RESult:COUNt:FAILures? <MaskTestName>

Returns the number of sample hits that violated the mask.

Query parameters:

Return values:

<SampleHits> Range: 0 to 100E+24

Increment: 1

*RST: 0

Usage: Query only

MTESt:RESult:FRATe? <MaskTestName>

Ratio of acquisition hits to the number of tested acquisitions.

Query parameters:

Command Reference