User manual

Remote Control

R&S

RTO

604User Manual 1316.0827.02 ─ 06

MTESt:SEGMent:RESCale:RECalculate <MaskTestName>, <MaskSegmIdx>

Multiplies and adds the given x- and y-factors and offsets to the coordinates of all points

of the selected mask segment.

Setting parameters:

<MaskSegmIdx> Index of the mask segment in the mask definition

Usage: Setting only

MTESt:SEGMent:RESCale:XFACtor <MaskTestName>,

MTESt:SEGMent:RESCale:XFACtor? <MaskTestName>, <MaskSegmIdx>

Stretches or compresses the selected mask segment in horizontal direction. The x-values

of all points of the selected mask segment are multiplied with this factor. Factors >1

stretch the mask segment, while factors between 0 and 1 compress it. Negative values

are possible and change the algebraic sign.

Only takes effect after the MTESt:SEGMent:RESCale:RECalculate command.

Parameters:

<ExpansionFactorX> Range: -100 to 100

Increment: 1

*RST: 1

Parameters for setting and query:

<MaskSegmIdx> Index of the mask segment in the mask definition

MTESt:SEGMent:RESCale:YFACtor <MaskTestName>,

MTESt:SEGMent:RESCale:YFACtor? <MaskTestName>, <MaskSegmIdx>

Stretches or compresses the selected mask segment in vertical direction. The y-values

of all points of the selected mask segment are multiplied with this factor. Factors >1

stretch the mask segment, while factors between 0 and 1 compress it. Negative values

are possible and change the algebraic sign.

Only takes effect after the MTESt:SEGMent:RESCale:RECalculate command.

Parameters:

<ExpansionFactorY> Range: -100 to 100

Increment: 1

*RST: 1

Parameters for setting and query:

<MaskSegmIdx> Index of the mask segment in the mask definition

Command Reference