User manual

Remote Control

R&S

RTO

602User Manual 1316.0827.02 ─ 06

Parameters:

<Region> UPPer | LOWer | INNer

UPPer

the segment points are connected to a line, the display area above

this line is the mask segment

LOWer

the segment points are connected to a line, the display area below

this line is the mask segment

INNer

the segment points form a closed geometrical shape, which is the

mask segment

*RST: INNer

Parameters for setting and query:

<MaskSegmIdx> Index of the mask segment in the mask definition

MTESt:

SEGMent:POINt:ADD <MaskTestName>, <MaskSegmIdx>

Adds a new point to the segment definition.

Setting parameters:

<MaskSegmIdx> Index of the mask segment in the mask definition

Usage: Setting only

MTESt:SEGMent:POINt:INSert <MaskTestName>, <MaskSegmIdx>,

Inserts a new point before the specified mask segment point.

Setting parameters:

<MaskSegmIdx> Index of the mask segment in the mask definition

<MaskSegmPointIdx>Index of the mask segment point in the mask definition

Usage: Setting only

MTESt:SEGMent:POINt:REMove <MaskTestName>, <MaskSegmIdx>,

Removes the specified point from the mask segment.

Setting parameters:

<MaskSegmIdx> Index of the mask segment in the mask definition

Command Reference