User manual

Remote Control
R&S
®
RTO
592User Manual 1316.0827.02 ─ 06
REFCurve<m>:DELete
Deletes the reference waveform file selected by REFCurve<m>:NAME on page 591.
Suffix:
<m>
.
1..4
Reference waveform
Usage: Event
REFCurve<m>:CLEar
The selected reference waveform is no longer displayed, its memory is deleted.
Suffix:
<m>
.
1..4
Reference waveform
Usage: Event
REFCurve<m>:RESTore
Restores the settings of the source waveform, if vertical scaling is set to "Independent"
(see REFCurve<m>:VMODe on page 592).
Suffix:
<m>
.
1..4
Reference waveform
Usage: Event
SCPI confirmed
16.2.11.2 Scaling
REFCurve<m>:VMODe..................................................................................................592
REFCurve<m>:SCALe...................................................................................................593
REFCurve<m>:POSition.................................................................................................593
REFCurve<m>:RESCale:VERTical:STATe.......................................................................593
REFCurve<m>:RESCale:VERTical:FACTor......................................................................594
REFCurve<m>:RESCale:VERTical:OFFSet......................................................................594
REFCurve<m>:HMODe..................................................................................................594
REFCurve<m>:RESCale:HORizontal:STATe....................................................................595
REFCurve<m>:RESCale:HORizontal:FACTor...................................................................595
REFCurve<m>:RESCale:HORizontal:OFFSet...................................................................595
REFCurve<m>:VMODe <VerticalMode>
Selects the coupling of vertical settings.
Suffix:
<m>
.
1..4
Reference waveform
Command Reference